MADRIX - LED Lighting Control Software
MADRIX Maybe is the best great LED lighting control software in the world!

 

MADRIX Price  (from http://www.madrix.com )


only software not hardware output, ultimate version need 4000EUR

 

Demo version is Free, have any limitations, Can't be use in lighting project


DEMO Version Limited:
 All 3 live Previews will display "! NO MADRIX KEY !" ,
Data output will stop after each minute for a short period,
The middle Preview goes black each minute for a short period.
......

 

OK, if you have Madrix Key or any Crack, Madrix software then can change to 4000EUD ultimate version,
will have 256 Universe DMX512 (131072Channels) and  1310720 DVI output, and not any limit.
Our LAN512 box connect to Madrix,  like below, Madrix will have 256 Universe and 1310720 DVI output
LAN512 have 512 channels hardware output and have DMX512<->ArtNet Function
How to crack, can email to hahan: hahan@21cn.com / qq99958544@126.com


Our LAN512 box in LAN and link to Madrix

 

 

 

OK, What LAN512 Box can do ?

1: Our LAN512 Box can link to Madrix like a ultimate Key. (Main Function)
2: Have 1 Universe 512 channels ArtNet hardware output. can link your DMX512 lighting to control, can link 170pcs RGB LED fixture. When your want more then 512 channels, can buy more one our Artnet box or other ArtNet device to add hardware output. (ArtNet->DMX512)
3: Can get any DMX512 data to 3D software (DMX512->ArtNet)

----------------------------------------------------------------------------------------

How to install ?

1: First, Install Madrix software, can install 2.14f ,2.14g, 2.14h, 2.14i, 3.1a, 3.2, 3.3RC, 3.3a, 3.3b, 3.4RC, 3.4 or 3.4a version, please not install other version. install file can download from: http://www.madrix.com
    how to update our driver for new version, please email to : hahan@21cn.com  or download our DVD from: http://yunpan.cn/cdYqHG6zznJra  (need a password, please Email me to get password) [e2a4]

2: Second, Install our LAN512 Driver. only run our disk "LAN512 Driver" DIR's setup.exe.

3: Now, when our LAN512 box in LAN or Route, LAN512 box will like a key link to Madrix.

4: When you want link RGB fixture from LAN512 box hardware output, must use Artnet, do this:
in Madrix Menu "Preferences->Device Manager->Art-Net" press "Find Auto" button, Madrix Will find "Quman LAN512" and show in windows. When find LAN512, now press "DMX Devices" tab, you will see "Off" in Quman LAN512, please select "Enable" button, and press "Apply" or "OK" button to "On", do this, Artnet setup now is completed, Artnet data will send to box and output DMX512 to your fixture. Please note: when your PC not Link in LAN , "Find Auto" button not be use.

5: When you want change LAN512 box Subnet\Universe\IP or Get any information or test LAN512 box, can run our windows or Android software "LAN512 Setup" to setup LAN512 box. iOS version will supply soon.

6: Please note: when you reinstall madrix software or reinstall Madrix PLEXUS driver, must reinstall our LAN512 Driver again (run our setup.exe). otherwise, maybe our LAN512 driver will have ERROR.
If you not sure our driver is good, sometimes, you can run our windows software  "LAN512 Setup.exe" to check our Driver and Box.

7:Attention please: All our software do not run in a virtual machine, don't try to change our software, don't try to debug our software, if have Antivirus software, please try to add to white list or close it, if not may will go wrong.
When first run Madrix software, Please add Madrix to "Windows Firewall" white list or close "Windows Firewall", if not, Madrix only can send any data to LAN, but not get any data from LAN.
If our Drive not auto close "Windows Firewall", You can do this to colse "Windows FireWall" : Clicking "Control Panel->Windows Firewall->Turn off" .
---------------------------------------------------------------------------------------

if have any bug or any question, please email to me hahan@21cn.com

                    by hahan
                2015-07-21

 

 

 

How to setup in Madrix ?

Run Madrix software, in Menu "Preferences->Options->Devices(USB/PCI)" must select "MADRIX PLEXUS interfaces", default is selected.

 

 

 

How to link RGB light from LAN512 box hardware output with Artnet ?

In Madrix Menu "Preferences->Device Manager->Art-Net" press "Find Auto" button, Madrix Will find "Quman LAN512" and show in windows. When find LAN512, now press "DMX Devices" tab, you will see "Off" in Quman LAN512, please select "Enable" button, and press "Apply" or "OK" button to "On", do this, Artnet setup now is completed, Artnet data will send to box and output DMX512 to your fixture. Please note: when your PC not Link in LAN , "Find Auto" button not be use.

 

 

 

How to Check and Setup LAN512 box Subnet\Universe ...

Can run any ArtNet software or Windows CMD ping IP or our LAN512 setup software to check LAN512 box, if in artnet software use "Refresh", LAN512 will send any tick pack to you, and show to you.

 

 

 

 

LAN512 BOX Shell

 

 

How much about the LAN512 Madrix Box price?
This box Now is 1700(RMB) / $267(USD)  /  236(EUR)

 

How to buy?
If you want a sample, maybe can buy form here: http://www.aliexpress.com  ,we have any agents in aliexpress, or if you have any friend in China, can let your friend buy from me.

 

 

 

by hahan
2015-09-03